Safety And Instructional Decals - Toro 20636 Mode D'emploi

Safety and Instructional Decals

Important: Safety and instruction decals are located near areas of potential danger. Replace damaged
decals.
Manufacturer's Mark
1. Indicates the blade is identified as a part from the original
machine manufacturer.
1. Height of cut
1. Height of cut
1. Warning—read the Operator's Manual for information on charging the battery; contains lead; do not discard.
2. Read the Operator's Manual.
110-7058
110-7178
1. Read the Operator's
Manual.
2. Remove the fuse box
decal.
3. Remove the fuse box
cover.
1. Warning—read the Operator's Manual.
2. Cutting, dismemberment hazard of hand or foot—remove
the spark plug wire before performing any maintenance
on the machine.
3. Thrown object hazard—keep bystanders a safe distance
from the machine.
4. Cutting, dismemberment hazard of hand or foot—stay away
from moving parts.
5. Thrown object hazard—keep deflector in place.
104-7953
Model 20638 only
4
110-7059
Model 20638 only
4. Install the fuse.
5. Replace the fuse box
cover.
6. Start the engine.
110-7126