Main Menu; Information Menu; Parameters Menu - Tractel dynafor HHD Mode D'emploi

5.5.6. Main menu

§5.5.6
The main menu is entered by holding down (for two
seconds) the "OK" button (item E, fig. 1)
A
D
A Information menu (see 5.5.7)
B Parameters menu (see 5.5.8)
C Recording menu (see 5.5.9)
D Language menu (see 5.5.10)
E Network menu (see 5.5.11)
F Thresholds menu (see 5.5.12)
To return to the main display, hold down (for one
second) the left button.

5.5.7. Information menu

The "Information" screen is entered by pressing the
"OK" button briefly (item E, fig. 1) when the "Information"
icon is highlighted from the main menu.
Various items of information about the hand held display
and the paired sensors are available. The screen is
_a
navigated by pressing the left and right buttons.
Display unit information:
B
§5.5.7_b
E
A Product serial number
B Master radio address
C Slave radio address
D Memory used for saving
E
Slave or master configuration mode
F
Acceleration value
C
G Manufacturer
H Software and hardware versions of the display unit
Sensor information:
F
A Sensor radio address
B
Manufacturer
C
Date of latest calibration
D
Date of next recommended calibration
E Software and hardware versions of the sensor
F Automatic zero value
G Sensor serial number
To return to the main menu, hold down (for one second)
the left button.

5.5.8. Parameters menu

§5.5.8 The "Parameters" screen is entered by pressing the
"OK" button briefly (item E, fig. 1) when the "Parameters"
A icon is highlighted from the main menu.
B
C
D
A
E
F
G
H
GB
A
B
C
D
E
F
G
B
11