Klarstein Bornholm Curved Ambient Mode D'emploi page 24

ECO function
Press both setting button (16) and (14) for 3s ( or press button (8) on remote control), ECO function runs.
In this mode, display shows only some indicators ( depending on what settings have been done before ECO
mode).
Asleep
In 10 seconds, if no button is pressed when unit is heating, it enters to asleep mode and only shows area
temperature.
Open window function
When area temperature decreases by 3 °C or more in 2 mins, heater activates open window detection and
displays indicator with a buzz sound, then stops heating. .
Day/Week timer shifting
Press button „W/24H" do shift between day timer & week timer settings. In week timer mode, indicator
"WeekTimer" is on; in week timer mode, indicator "Day Timer" is on.
Day timer: Display shows indicator "DayTime, " in this mode. First for Hour, press (16) on remote controller,
(14) and (15) buttons for concise one. Then for Minute, press (16) again and (14) and (15) buttons for concise
one, press OK button and save them.
Week timer: Week timer mode enables "4" periods a day, and "7" days a week. Display shows indicator
"Week Timer" in this mode; press (16) on remote controller for a day first (indicator (6) flashes) , by (14) and
(15) ; then the 1st period: press button (16) for a start time, same through (14) or (15). Then press button (16)
for a stop time and again through buttons of (14) or (15) . After setting the first period, then second period
third period...4th period etc.
When all needed setting is completed, press OK button and save them.
Instant cancelling
To delete all former settings (day timer or week timer), you just need to press button (16) on the display for
10 seconds.
Background light
In heating mode, pressing the OK button on the remote control will activate backlight colours. With each
press on the OK button the colour changes. There are 6 colours. If you have reached the last colour and press
OK again, the backlight will be turned off.
Turn off
Press the turn off switch. The heater stops working. Turn off power supply, heater is powered off.
24