Nemaxx WLS-01 Mode D'emploi page 7

SET LIGHT THRESHOLD
1. Press the right button for 2 seconds and the right numbers on the LCD will blink.
2. Press the right button and the numbers will change from 0 to 9.
3. Select the figure you want and then press the left button one time to exit the setting.
The numbers stop blinking and the light intensity is set.
Light Threshold Corresponding to Actual Light Intensity
Light Threshold
0
1
2
3
4
5
6
7
8
9
EN
Actual Light Intensity
deactivated
2.000 Lux
5.000 Lux
10.000 Lux
20.000 Lux
40.000 Lux
60.000 Lux
70.000 Lux
80.000 Lux
90.000 Lux
7
KEN001WLS
v01 • 17.05.2017
1