10.2 Ausstoßventil auswechseln
- Reinigung durchführen (siehe Punkt 8.).
- Ausstoßeinheit abschrauben (siehe
Punkt 8.).
- Ausstoßventil mit Montageschlüssel
herausschrauben und entfernen.
- Neues Ausstoßventil einschrauben mit
Montageschlüssel festdrehen.
- Ausstoßeinheit bis zum Anschlag aufstecken
und Überwurfmutter gut festdrehen
(siehe Punkt 6.2). Auf festen Sitz achten!
10.2 Ejection valve replacement
- Realize cleaning (see point 8.).
- Unscrew the ejection unit (see point 8.).
- Screw out the ejection valve with the
assembly wrench and remove.
- Screw in the new ejection valve and
tighten firmly with the assembly wrench.
- Push on the ejection unit up to the stop
and tighten the unit nut firmly (see point
6.2). Check to ensure a secure fitting!
38