Electrical Connections; Dimensions; Maintenance And Cleaning - Bosch 1500 Mode D'emploi

ATTENTION! Hazard of crushing fingers with the rotating fan rotor! Install the guard
against the direct touch of moving parts before starting!
7 FIRST START OF THE DEVICE
The rst start may only take place after all safety precautions have been checked and risks have been
eliminated. After the bathroom extractor fan start-up, check that it runs steadily and the air is handled
e ciently (out of the room and through the exhaust duct to the outside).
The bathroom extractor fan may only be used with the front panel, which provides protection against
contact with moving parts.
The installer is responsible for compliance with the applicable standards and may be held liable for
accidents resulting from the absence of safety devices.

8 ELECTRICAL CONNECTIONS

• The electrical connection and start-up may only be carried out by quali ed personnel who are
quali ed to perform electrical work.
• Always follow the applicable standards, safety regulations and technical requirements speci ed by
the power company!
• The type of mains system, voltage and frequency must match the data on the rating plate of the
bathroom extractor fan.
• For bathroom extractor fans with stop delay time, the minimum voltage at the T terminal that starts
the stop delay countdown or starts the exhaust fan is 130V AC.

9 DIMENSIONS

The dimensions of the models are given on the packaging.

10 MAINTENANCE AND CLEANING

Maintenance
• Observe the safety and OHS regulations during all maintenance work.
• Before servicing the bathroom extractor fan, disconnect it from the mains and secure it against
inadvertent operation!
Fan 1500, Fan 1500 DH
Fig 4
L
N
L
N
15