Caring For Your Machine; Cleaning Hook Area And Feed Dogs - Blaupunkt COMFORT 930 Manuel

3. CARING FOR YOUR MACHINE

CLEANING HOOK AREA AND FEED DOGS

Always disconnect the machine from power supply
by removing the plug from the wall-outlet.
To ensure the best possible operation of your
machine, it is necessary to keep the essential parts
clean at all times.
1. Raise the needle to its highest position.
2. Remove the needle plate (1).
3. Remove the bobbin case (2).
4. Clean the feed dogs and hook area with the lint
brush. Put one drop of sewing machine oil on the
hook race as indicated by the arrows(A,B).
5. Replace the bobbin case with the projection (3)
positioned against the spring (4). Replace the
needle plate.
EN
31