Buttonhole Making - Blaupunkt COMFORT 930 Manuel

BUTTONHOLE MAKING

AUTOMATIC BUTTONHOLE
USING BUTTONHOLE FOOT
Your machine offers you two different widths of bartack,
keyhole and round end buttonholes sewn by a system that
measures the size of the button and calculates the size of
buttonhole required. All of this is done in one easy step.
PROCEDURE
Use an interfacing in the area of the garment where
buttonholes are placed. Stabilizer or regular interfacing
can be used.
Make a practice buttonhole on a scrap of the fabric you
are using. Then try the buttonhole with the selected
button.
1. Select one of the buttonhole patterns.
2. Replace the presser foot with the buttonhole foot. (Refer to
"Changing presser foot" on page 11.)
3. Insert the button into the buttonhole foot. (Refer to "Using
buttonhole foot" above.)
4. Lower the buttonhole lever (C) so that it drops down
vertically between the stoppers (A) and (B).
Tab A Tab B
( )
C
( )
A
( )
C
( )
C
EN
( )
B
Buttonhole foot
( )
C
27