Functions Of Control Panel - Blaupunkt COMFORT 930 Manuel

FUNCTIONS OF CONTROL PANEL

Stitch length
Needle position indicator
Presser foot indicator
LCD display
Stitch pattern number
Letter stitch mode indicator
Twin needle mode indicator
Stitch width
Twin needle mode
When using twin needles, push the twin needle
mode switch regardless of the stitch you
selected. Doing so will reduce the stitch width
automatically and save broken needles and
possible damage to your machine.
While the switch is pushed,
on the LCD.
Patterns with circled numbers in the pattern
reference guide cannot be selected and a beep
will sound.
CONTROL PANEL FUNCTIONS
PATTERN NUMBER SELECTION BUTTONS
When the machine is turned on, straight stitch is selected and a
pop-up screen for individual preference settings appears on the
LCD display.
By pressing the
number by one.
By holding the
number by ten.
NOTE The presser foot to be used is indicated by the
letter (B,J, Z,H,O) right
number.
STITCH LENGTH AND STITCH WIDTH/NEEDLE
POSITION ADJUSTMENT BUTTONS
Your sewing machine will produce your stitching requirements at
an Auto/Default stitch Length and Width.
You can manually change the length, width or needle position
for straight stitch according to your preference by pushing manual
adjustment buttons.
When the stitch length or stitch width is changed from the default
around
setting,
When the stitch length or stitch width is reset back to the default
setting, reappears around
12
will appear
or button you can increase or reduce the
or button you can increase or reduce the
to the right of the stitch
or disappears from the LCD.
or in the LCD.
Pattern number reference guide
Pattern selection button
Stitch length adjustment button
Letter pattern mode button
Twin needle mode button
Stitch width adjustment button
Letter pattern mode
While pressing the button
the LCD.
Press the or to select the letter pattern
number, which will appear in the display.
The machine sews automatically
complete cycle of pattern string and stops.
Letter pattern number
reference guide
Presser foot indicator
(B,J,Z,H,O)
Buttons for pattern
number selection
Stitch pattern number
Manual adjustment
buttons for stitch length
Stitch lenght
Default stitch length
indicator
Manual adjustment
buttons for stitch
width/needle
position
Stitch width/needle
position of straight stitch
Default stitch width indicator
will appear on
one