EN
MORE DECORATIVE STITCHES
SETTINGS :Presser foot - General Purpose Foot(J)
25
or Satin Stitch Foot (Z)
:Thread tension control - 4 or 3
Following are examples of how to use and sew these
stitches. You can use some other decorative stitches in
the same way.You should carry out a test sewing on an
extra piece of the fabric being sewn to check the
decorative pattern to be used. Before starting to sew,
check that there is enough thread wound onto the
bobbin to ensure that the thread will not run out during
sewing.
For best results, stabilize fabric with a tear-away or
washaway stabilizer underneath when stitching.
Helpful Hint: Bobbin thread should not appear on
the top side of the fabric, so it may be necessary to
slightly lower the tension setting.
25