Converting To Free-Arm Sewing; Winding The Bobbin - Blaupunkt COMFORT 930 Manuel

CONVERTING TO FREE-ARM SEWING

Your machine can be used either as a flat- bed or as a
free-arm model.
With the extension table in position, it provides a large
working surface as a standard flat-bed model.
To remove the extension table, hold it firmly with both
hands and pull it off to the left as shown. To replace, slide
the extension table back into place until it clicks.
With the extension table removed the machine converts into a slim free-arm model for sewing children's clothes, cuffs,
trouser legs, and other awkward places.

WINDING THE BOBBIN

1. Place a spool of thread on the spool pin, and secure it
with the spool pin cap. Pull the thread out from the spool
and place it through the thread guides as shown in the
illustration.
2. Put the end of the thread through the hole in the bobbin
as shown.
3. Push the bobbin winder shaft to the far left position, if it
is not already there. Place the bobbin onto the shaft with
the end of the thread coming from the top of the bobbin.
Push the bobbin winder shaft to the right until it clicks.
Hold onto the end of the thread.
4. Start the machine. The bobbin will automatically stop
turning when completely filled. Push the shaft to the left to remove the bobbin and then cut the thread.
2
3
4
EN
T
H
R
E
A
D
I
N
G
5