Possible Faults; Technical Data; Guarantee - ATIKA HKM 680 Notice Originale

Before each fault elimination:
 wait for standstill of the beater

After each fault clearance, put into operation and recheck all security installations.
Problem
The device does not sweep
properly
The circular brushes (10) do
not turn
The device is difficult to ma-
noeuvre
Type / Model
Year of construction
Drive
Sweeping capacity
Working width
Circular brushes
Brush roller
Debris container (capacity)
Weight
Please observe the enclosed terms of guarantee.
10

Possible faults

Possibel cause
 Walking too slowly or too fast
 Debris container (9) full
 Circular brushes (10) and/or brush roller
(14) heavily worn
 Belt (13) jumped off or torn
 Guide roller (15) dirty or defective

Technical data

Guarantee

Remedy
 Push the device at normal walking speed (approx.
4 km/h) ahead of you.
 Empty the debris container (9)
 Replace the circular brushes (10) and/or brush
roller
(14)
 Clamp in belt (13) or replace
 Clean or replace the guide roller (15)
HKM 680
see last page
manual
2200 m²/h (at 4 km/h)
680 mm
Ø 230 mm
Ø 108 mm x 380 mm
12 l
9.4 kg