Description; Technical Specification - Parker UHPN2-550 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

2 Description

The Parker domnick hunter UHPN2 range of nitrogen gas generators employ robust, field proven technology to produce ultra high purity nitrogen
for critical life science, chemical analysis and spectroscopy applications. Flow rates range from 0.55 L/min (0.02 cfm) to 3 L/min (0.11 cfm), with
purities >99.9995% ( 5ppm) at an outlet pressure of 5 barg (72.5 psig / 0.5 MPa / 500 kPa).
The generators provide a continuous stream of ultra high purity nitrogen from a single 'plug & play' unit. Models are available with and without an
integral an oil free compressor.

2.1 Technical Specification

This specification is valid when the equipment is located, installed, operated, and maintained as specified within this user guide.
Outlet Parameters
Flow
(1)
Set Pressure
(2)
Purity
content
(O
)
2
(3)
Dewpoint
(@ 5bar)
Particulates
Inlet Parameters
Integral Compressor
Air Quality
Air Pressure
Minimum Air Temperature
Maximum Air Temperature
Air : N
Ratio (@ 8 barg)
2
Peak Flow (@ 8 barg)
Port Connections
(4)
Air Inlet
Gas Outlet
Electrical Data
Supply Voltage
Connection type
Current
(5)
Power
(6)
Fuse
Supply Voltage
Connection type
Current
(6)
Power
(7)
Fuse
(1) If you are using the generator's internal Mass Flow Controller, please note that the pressure at the N2 MFC Outlet port will be approximately 0.5 bar (7.3 psi) below the set
pressure.
(2) The specified purities are referenced to 20
monitored in critical applications.
(3) The Pressure Dew Point (PDP) is the temperature at which the water vapour within the pressurised gas condenses in to a liquid.
(4) Using the 1/4 BSPP - 1/4 tube fittings provided.
(5) The power consumption in standby mode and economy mode is 3W for all models.
(6) Fuses are Anti surge (T), 250V, 5x20mm HBC, Breaking capacity 1500A @250V, IEC60127, UL R/C.
UHPN2
Units
550
L/min (cfm)
0.55 (0.02)
bar g
(psig / MPa / kPa)
% (ppm)
o
o
PDP
C (
F)
ISO 8573-1: 2010
-
No
3.2.1
ISO 8573-1: 2010
bar g
(psig / MPa / kPa)
o
o
C (
F)
o
o
C (
F)
--
17.9
L/min (cfm)
33 (1.17)
-
1/4"
Vac
-
A
0.54
W
85
A
5
Vac
-
A
1.15
W
89
A
5
o
C ambient temperature. A reduction in purity may be experienced with increased temperature, it is recommended that the purity is
UHPN2
UHPN2
UHPN2
550C
750
750C
0.75 (0.03)
(72.5 / 0.5 / 500)
99.9995 ( 5)
Yes
No
Yes
N/A
3.2.1
N/A
(116 - 143.6 / 0.8 - 0.99 / 800 - 990)
--
13.4
--
--
33 (1.17)
--
N/A
1/4"
N/A
1/8"
207 - 253 V 50/60Hz
IEC 60320 - C14
2.7
0.54
2.7
606
85
606
5
5
5
104 - 127 V 60Hz
IEC 60320 - C14
4.95
1.15
4.95
576
89
576
6.3
5
6.3
UHPN2
UHPN2
1500
1500C
1.5 (0.05)
5
-40 (-40)
Class 2
No
Yes
3.2.1
N/A
8 - 9.9
15 (59)
25 (77)
20.8
--
117 (4.13)
--
1/4"
N/A
1/8"
0.54
3.15
88
698
5
5
1.15
5.2
89
596
5
8
UHPN2
UHPN2
3000
3000C
3.0 (0.11)
No
Yes
3.2.1
N/A
11.0
--
116 (4.10)
--
1/4"
N/A
0.54
3.15
88
698
5
5
1.15
5.2
89
596
5
8
3

Publicité

Table des Matières
loading

Table des Matières