Publicité
Les langues disponibles
Les langues disponibles
User Manual
English
A screen will appear which informs you, that new hardware was found. Select "Locate and install driver
software (recommended)" When you are asked to insert the disk, either insert the Driver CD or (if you
have downloaded the CDM drivers before) select "I don´t have the disc". Show me other options". Then
"Check for a solution" and "Browse for driver software on your computer". Browse the folder where the
CDM driver has been stored and continue with "Next". The driver will then be installed. It is important then
to determine which COM port has been assigned to the device for configuring the application that will use
the device.
Open the Device Manager (located in "Control Panel\System" then select the "Hardware" tab and click
"Device Manager") and select "View > Devices by Connection", the device appears as a" USB Serial
Converter" with an additional COM port with the label "USB Serial Port".
This screen shows the
device connected to
COM3.
If you have any difficulties with the drivers, you may download the updated or appropriate versions from
FTDI Web site www.ftdichip.com/Drivers/VCP.htm, supported device "FT232BL(M)".
Uninstalling Instruction
With the release of Microsoft Windows Vista, the FTDI uninstaller has been rendered unusable due to
Windows Resource Protection preventing the executable from deleting driver files and associated
registry values. Vista will only allow the system itself to modify files and registry values in these locations.
Consequently, a new method for uninstalling is required. Devices can be removed using the Device
Manager by simply right clicking on the mouse and selecting "Uninstall". This will delete the associated
registry entries for that device only. Vista provides an automatic method to delete driver files via a check
box to "Delete the driver software for this device" on the uninstall dialog box.
Publicité
