Smoke Alarm Installation - Hekatron Genius Plus Mode D'emploi

4

Smoke alarm installation

Installation with screws/dowels
Install the smoke alarm with the
provided installation material. If
other screws are used, the screw
heads must not reach into the base
by more than 5.0 mm.
We recommend using 3.5 x 25 mm
oval-head screws. The installation
surface must be level.
For secure and permanent
installation, screws/dowels are
recommended.
16
Installation with adhesive pad
If the smoke alarm is to be installed
with an adhesive pad, only an
adhesive pad provided by the
manufacturer may be used. This
has to be ordered separately. The
installation surfaces of the adhe-
sive pad must be smooth, level,
undamaged, clean and free from
dust, grease and solvents.
EN