Medela BabyWeigh II Mode D'emploi page 20

9. Instructions for Weighing (cont.)
Instructions for Weighing
20
Setup:
1. Attach the tray and level the scale prior to weighing.
2. Press the
display. If using a blanket or pad on the scale, press
tare/zero
be indicated.
Before-feed Weight (pre-weight):
3. Remove baby from the scale, place baby in a safe location and
then record pre-weight.
Feed baby. Leave scale on during feeding.
After-feed Weight (post-weight):
• Ensure the display has reset to '0'. If it has not, press the
button to zero out the display.
1. If the scale has powered off, press the
a '0' appears in the display. The pre-weight is saved in memory,
even if the scale is powered off.
button and wait until a '0' appears in the
button to zero out the excess weight. Net
WARNING
CAUTION
NOTICE
i
Information
1. Place baby on the scale,
holding one hand just
above baby. Wait until the
display indicates lock
(Beep sound). The value that
appears is the pre-weight.
2. Press the
1
store the pre-weight.
button and wait until
will
button to