Using The Ac Adapter - Medela BabyWeigh II Mode D'emploi

Using the AC adapter

1. Insert the AC adapter jack
into the AC adapter inlet
on the right side of the
main unit.
2. Plug the AC adapter into
the power outlet.
• This equipment must be used with the included AC
adapter or 4 AA batteries.
How to set up
i
Use the scale on a firm, flat and stable location.
• Do not position scale anywhere that is subject to direct
sunlight, near heating equipment, or directly in the path of
an air conditioner outlet, or other source of high airflow.
• Do not use scale anywhere that is subject to significant
temperature change.
• Do not position scale anywhere that is either damp or
subject to high humidity.
• After positioning the scale and before use, pick up the
baby tray from both sides to confirm that the tray is secure,
and not easily removed.
• Ensure that the tray locking lever is pushed in.
WARNING
CAUTION
NOTICE
Information
Content appearance
may vary from pictures.
17