Scale Settings Adjustment - Medela BabyWeigh II Mode D'emploi

11. Scale Settings Adjustment

To adjust settings for Display Hold Time and Auto Power
Off Time complete the following steps:
Display Hold Time
Enter the setting menu by pressing
the key.
(Beep sound)
3
Press button while the screen
is flashing (Beep sound). The LCD
screen will show SEt.
Depending on which setting you wish to adjust follow next
steps under instructions for each setting.
The "Display Hold Time" setting holds the display for a
specified length of time. This setting determines how long
the weight displays after the baby has been removed from
the scale. It also controls the length of time the weight is
displayed when recalling pre-feed, post-feed and amount
fed values.
tare/zero
1. Press
The hold time is shown (the default is 10 seconds), and the
value is changed by pressing this key.
* The hold times that can be set are 5 seconds, 10 seconds, 20 seconds or 30 seconds.
2. To save the hold time setting,
3
Press again.
(Beep sound)
key.
(Beep sound)
25