Bosch GLM 50-27 CG Professional Notice Originale page 49

Grade measurement/digital spirit level
Select the inclination measurement/digital spirit level
The measuring tool automatically switches between two states.
The digital spirit level is used to check the horizontal or vertical align-
ment of an object (e.g. washing machine, refrigerator, etc.).
When the inclination exceeds 3°, the ball in the display lights up red.
1°2° 3°
Grade measurement is used to measure a slope or incline (e.g. of
stairs, railings, when fitting furniture, laying pipes, etc.).
The left-hand side of the measuring tool serves as the reference level
for grade measurement.
Memory value display
The value or end result of each completed measurement is automatically saved.
Maximum 30 values (measured values or end results) can be retrieved.
Select the memory function [ ].
The number of the memory value is shown at the top of the display,
4
the corresponding memory value is shown at the bottom and the cor-
6.350 m
responding measuring function is shown on the left.
7.620 m
Press the [+] button (6) to browse forwards through the saved val-
8.890 m
3
ues.
430.16 m
Press the [–] button (3) to browse backwards through the saved val-
ues.
The oldest value is located in position 1 in the memory, while the newest value is in posi-
tion 30 (when 30 memory values are available). If a further value is saved, the oldest
value in the memory is always deleted.
Deleting the memory
To delete an individual memory value, select this value(see "Memory value display",
page 49). To delete, first press the on/off/back button (8) [ ] and confirm this by
pressing the (2) [Func] button.
To delete all the contents of the memory, press the (7) [ ] button and select the
function. Then press the (6) [+] button and confirm this by pressing the (2) [Func] but-
ton.
Bosch Power Tools
English | 49
.
1 609 92A 4ZJ | (14.10.2020)