Information Codes - Samsung NY63875S Série Mode D'emploi

Troubleshooting
Problem
Food does not The oven controls are not
broil properly in set properly.
the oven.
The oven door was not
closed during broiling.
The rack has not been
properly positioned.

Information codes

Code
Meaning
symbol
Oven sensor malfunction.
The oven is overheating.
Check the Control PBA NTC
Sensor.
Temp probe malfunction.
Check the PBA NTC Sensor.
Check the PBA NTC Sensor.
Check the cooling system.
Control pad malfunction.
Door lock malfunction.
PCB signal malfunction.
Touch IC and PCB signal
malfunction.
60 English
NY63T8751SS_AA_DG68-01218A-00_EN+MES+CFR.indb 60
Cause Action
See page 32.
See page 32.
See the broiling guide on page
33.
Solution
1. Tap OFF, and then restart the
oven.
2. If the problem persists,
disconnect all power to
the oven range for at
least 30 seconds and then
reconnect the power.
Code
Meaning
symbol
Divider switch malfunction.
** If these solutions do not solve the problem, contact a local Samsung service
center or call 1-800-SAMSUNG (1-800-726-7864).
Solution
1. If the Divider is in the oven,
make sure it is pushed in all
the way.
2. If the Divider is not in the
oven, see if something is
pressing against the divider
switch in the back of the oven.
3. If the Divider is all the way in
or there is nothing pressing
against the Divider switch,
tap OFF, and then restart
the oven. If the problem
persists, disconnect all power
to the oven range for at
least 30 seconds, and then
reconnect the power.
2020-03-23 6:46:21