Operation; Cleaning And Care - Unold ALLROUND Notice D'utilisation

DE

OPERATION

EN
1. Prepare your dish.
2. Set the temperature switch to the desired temperature.
FR
3. Using the function switch, select the desired function. Available options: top
NL
heat, top/bottom heat and bottom heat.
4. Timer
IT
Depending on the necessary cooling time, set the timer switch to a time
between 0 and 60 minutes. Turn the timer once to the maximum possible
ES
time and then back to the desired minutes. This ensures safe switching of
PL
the timer. After this time has lapsed, the oven beeps and is automatically
switched off. If you wish to prepare a dish that takes longer than 60 min-
utes in the oven, you must set the timer again. You can readjust the timer
settings at any time while the oven is in operation.
5. Place the food in the oven.
6. If the oven is controlled by the timer, it is automatically switched off when
the set time has lapsed.
7. To switch off the oven, also set the temperature switch to 0.
8. To fully shut down the appliance, disconnect the power cord from the socket.
Caution! During and after operation, the appliance is very hot! Temperature
of accessible surfaces may be high when the appliance is operating

CLEANING AND CARE

1. Do not immerse the appliance and power cord in water or other liquids.
2. All removable parts and accessories such as the baking tray and oven rack
can be cleaned with warm water and a mild washing-up liquid. Rinse the
32 von 92
Copyright UNOLD AG | www.unold.de
Before cleaning the oven, switch it off (function switch to AUS/
OFF) and disconnect the power cord from the socket.
Allow the appliance to cool down to room temperature.
Stand 21.2.2020