JVC KD-R771BTM Manuel D'instructions page 11

BLUETOOTH®
Auto Pairing
When you connect the Android device to
the USB input terminal, pairing request (via
Bluetooth) is automatically activated.
Press the volume knob to pair once you have
confirmed the device name.
Automatic pairing request is activated only if:
– Bluetooth function of the connected devcie is
turned on.
– [AUTO CNNT] is set to [ON]. ( 12)
– JVC MUSIC PLAY application is installed on
the Android device ( 5) and [AUTO MODE] is
selected ( 6).
BLUETOOTH — Mobile phone
Receive a call
When there is an incoming call:
• The buttons will blink in the blinking pattern you have selected in [RING ILLUMI]. ( 10)
• The unit answers the call automatically if [AUTO ANSWER] is set to a selected time. ( 10)
During a call:
• The buttons stop flashing.
• If you turn off the unit or detach the faceplate, the Bluetooth connection is disconnected.
To On the faceplate
First incoming call...
Answer a call
Press
Reject a call
Press and hold
volume knob.
End a call
Press and hold
volume knob.
While talking on the first incoming call...
Answer another
Press
incoming call and hold
the current call
Reject another
Press and hold
incoming call
volume knob.
On the remote control
Press
or the volume knob.
Press and hold
or the
Press and hold
or the
Press
or the volume knob.
Press and hold
or the
.
.
.
.
.
9
ENGLISH