Preliminary Steps - Sony SRS-X9 Mode D'emploi

A
Connecting to Wi-Fi using a smartphone or iPhone
Introduction
Install the free app "SongPal" to add the unit to
the Wi-Fi network to which your smartphone/
iPhone is connected. The smartphone/iPhone
needs to be connected via Wi-Fi beforehand.*
Make a BLUETOOTH connection between the
smartphone/iPhone and the unit, then
configure Wi-Fi settings. Complete step 6
(page 7) within 15 minutes of turning on the
unit.
* Some wireless routers have multiple SSIDs. Connect
the unit to the same SSID as the smartphone/iPhone.
4
US
1

Preliminary steps:

 Record the SSID and password of your router
in the following spaces.
SSID:
Password:
For details, refer to the operating instructions of
your router.
 Make sure that a LAN cable is not connected
to the unit.*
 Install the "SongPal" app on your
smartphone/iPhone.
Search for "SongPal" on
Google Play or the App
Store.
* The wired and wireless connection cannot be used at the
same time.
2
Turn on the unit.
When the LINK indicator stops flashing and
turns off, go to the next step.
It takes about 1 minute to turn off.