Appliance And Cabinet Cutout Dimensions; Dimensions For Single Oven Units - Thermador Professional Serie Guide D'installation

Appliance and Cabinet Cutout Dimensions

Dimensions for Single Oven Units

NOTICES
A 2" diameter hole is required to run conduit to the
▯
junction box.
The cabinet base must be flat and capable of
▯
supporting a weight of at least 232 lbs (105 kg).
Under oven dimensions are provided as a general
▯
guideline and may be adjusted as needed based on a
particular application. Consult a design professional
for optimizing personal preferences.
Single Oven Wall Mount Installation
Single Oven Right Hinge
Single Oven Left Hinge
Single Oven Bottom Hinge
Single Oven Wall Mount Installation
*For single ovens installed into a wall cabinet, the
junction box may be located above, beneath, left or right
of the unit within reach of the power cord.
**For oven installation in a wall cabinet, the control panel
overlap is a minimum /
3
" (10mm) to max. 1 / " (25mm).
1
8 4
19