10. Remove the wire cover on top of the freezer door
to switch the side of the wires.
11. Remove the hinge and the grommet from the
freezer door. Detach the left side hinge cover and
pull the wires out of the hinge cover.
Hinge cover
Hinge cover
Grommet
Grommet
Be careful not to damage the electrical wires
CAUTION
when removing the hinge cover.
12. Use wrench to separate the hinge shaft and then
flip the hinge and reattach the hinge shaft.
And remove the shim at the top and attach it to
the other side.
DA68-03009G-03.indb 14
DA68-03009G-03.indb 14
13. Reassemble the hinge on the freezer door by
reversing the step 11. Make sure to use right side
hinge cover (which can be found underneath the
removed plastic cover from step 2) and remove
the grommet. After reassembling the hinge, wire
and the hinge cover, switch the side from left to
the right.
Grommet
Grommet
14. After switching the hinge, make sure to take out
Cover Wire Door R in the packing and close it
with the wire cover on the top of freezer door.
"Cover Wire Door R" can
be found in the packaging
15. Take off the handle cover and remove the screws,
make sure to detach the caps and the handle
from the right to left side of the door. (Make sure
to cover the right side with detached caps.)
Handles may not have cover depending on
the models.
English - 14
15. 1. 6.
15. 1. 6.
8:21
8:21