Electrical Connections - Danfoss EvoFlat WSS Guide D'installation

Mounting and installation instructions

3.3 Electrical connections

Before making electrical connections, please note the following:
Safety notes
Please read the relevant parts of the safety notes.
230 V
The flat station must be connected to 230 V AC and earth.
Disconnection
The substation must be electrically connected so that it can be discon-
nected for repairs.
Grounding / potential compensation
The station should be connected to a grounding point on the right side of
the station mounting rail.
AQ15928645880503-020501
EvoFlat
Authorized electrician
Electrical connections must be made by an authorized
electrician only.
Local standards
Electrical connections must be made in accordance with
current regulations and local standards.
© Danfoss | Produced by Danfoss Redan A/S | 2020.12 | 7