Danfoss EvoFlat WSS Guide D'installation page 4

Mounting and installation instructions
Reach
All products of the EvoFlat series comply with the provisions of the REACH
regulation.
We are therefore obliged to inform our customers about the presence of sub-
stances according to the SVHC candidate list, if they are present. We hereby
inform you: This product contains brass parts containing lead (CAS 7439-92-1)
in a concentration above 1% (w/w).
Potential equalization / grounding
Equipotential bonding is understood as all measures for eliminating electri-
cal potential differences (contact voltages), which can occur between eg
two pipelines. Equipotential bonding is an important measure for protec-
tion against electric shock. Equipotential bonding reduces corrosion in the
heat exchanger, instantaneous water heaters, district heating stations and
plumbing installations. Equipotential bonding should be in accordance with
the provisions 60364-4-41: 2007 and IEC 60364-5-54: 2011.
Binding point is marked with a grounding symbol on the bottom right corner
of the mounting plate and there is a hole in the mounting plate and a label
with grounding symbol.
Disposal
The station consists of materials that must not be disposed of with household
waste. Disconnect the entire energy supply and disassemble the product for
disassembly and dispose of it in accordance with local regulations.
4 | © Danfoss | Produced by Danfoss Redan A/S | 2020.12
EvoFlat
Please notice
Interventions and reworking of our components lead to
the loss of warranty.
AQ15928645880503-020501