Maintenance - Danfoss EvoFlat WSS Guide D'installation

Mounting and installation instructions

6.0 MAINTENANCE

The flat station requires little monitoring, apart from routine checks. It
is recommended to read the energy meter at regular intervals, and to
write down the meter readings.
Regular inspections of the flat station according to this Instruction are
recommended, which should include:
Strainers
Cleaning of strainers.
Meters
Checking of all operating parameters such as meter readings.
Temperatures
Checking of all temperatures, such as HS supply temperature and
PWH temperature.
Connections
Checking all connections for leakages.
Safety valves
The operation of the safety valves should be checked by turning
the valve head in the indicated direction.
Venting
Checking that the system is thoroughly vented.
Inspections should be carried out minimum every two years.
Spare parts can be ordered from Danfoss.
Please ensure that any enquiry includes the flat station serial number.
AQ15928645880503-020501
EvoFlat
Authorized personnel only
Assembly, start-up and maintenance work must be per-
formed by qualified and authorized personnel only.
© Danfoss | Produced by Danfoss Redan A/S | 2020.12 | 21