Declaration; Eu Declaration Of Conformity - Danfoss EvoFlat WSS Guide D'installation

Mounting and installation instructions

8.0 DECLARATION

8.1 Declaration of conformity
Category 0 with electrical equipment

EU DECLARATION OF CONFORMITY

Danfoss Redan A/S
Hårupvænget 11
DK-8600 Silkeborg
Denmark
declares on our sole responsibility that the product(s)
EvoFlat
Covered by this declaration is in conformity with the following directive(s), standard(s) or other norma-
tive document(s), provided that the product is used in accordance with our instructions.
EMC – Directive – 2004/108/EC
EN 61000-6-1 2007. Electromagnetic compati-
bility – General standard:
Immunity for residential, commercial and light
industry
EN 61000-6-3 2007. Electromagnetic compati-
bility – Generic standard:
Emission for residential, commercial & light
industry.
Pressure Equipment Directive – 97/23/EC
Equipment category: 0 (article 3.3).
Silkeborg - 08-10.2014
Place and date of issue
26 | © Danfoss | Produced by Danfoss Redan A/S | 2020.12
EvoFlat
Machinery Directive 2006/42/EC
EN 14121-1. Safety of machinery – Risk assess-
ment
EN 60204-1. Safety of machinery – Electrical
equipment of machines – Part 1:
General requirements.
Henrik Daugaard
Thomas Bruun Hansen
AQ15928645880503-020501