Lanaform Aroma Spring Manuel D'instruction page 5

(8) M button (mist): fragrance option
(9) W button (water): fountain option
(10) Water level indicator
INSTRUCTIONS FOR USE
FEATURES:
• Changing colours
• Capacity of 350 ml
• 1.5 hours of continuous diffusion
• Easy-to-fill water reservoir
• The fountain stops automatically when there is no more water left in the reservoir
FUNCTIONALITIES:
• Interior fountain
• Essential oils diffuser
• Eliminates electrostatic charges
• Improves ambient air quality
INSTRUCTIONS (SEE ILLUSTRATIONS, FIGURE 2):
• Place the fountain in the room half an hour before turning it on, on a flat surface, so that it can adjust to room
temperature (a).
• Ensure that the fountain is clean.
• Connect the reservoir to the glass dome using the silicon tube (b). This tube should be connected to the pump. Ensure
that the two ends of the tube are properly connected to the pump and to the glass dome (c).
• Fill the reservoir with a maximum of 350 ml clean water (the pump must be submerged). The water temperature must
not be more than 40°C (d).
• Pour two or three drops of essential oils in the reservoir (e).
• Place the dome over the reservoir, making sure that it has been correctly positioned on the designated notches (f and g).
• Connect the plug, with dry hands (h). The fountain is ready to use.
Functionalities of the fountain:
M button «fragrance option»:
Press once; the mist dispersal and the light effects will start to work. Press again and the system will turn off completely.
W button «fountain option»:
Press the button once and the fountain will start to work. Press again and the fountain option will turn off.
If you want the two functions to run simultaneously, press on button M and then on button W. The circulation of water,
the mist and the projection of colours will create the perfect environment for relaxation.
Aroma Spring
EN
5