ITM Italia Indirect Série Mode D'emploi page 14

Proceed as follows:
- Remove the fuel oil pipe.
- Slide out the photosensitive cell and the HT leads from the electrodes.
- Unscrew the four screws securing the head to the boiler (the head is removed complete).
- Slacken the two screws: the entire internal section of the head slides out; only the
cylindrical body and the tapered inlet remain accessible for cleaning.
N.B. - When refitting the combustion head after cleaning operations, do not move the nozzle
holder. Make sure, as required, that the nozzle is flush with the inside of the turbo. The
position of the electrodes must be respected, as well as the angle of the air adjustment fins.
7.
MAINTENANCE
The maintenance intervals recommended in this manual refer to generator operation of 8 ... 10
hours/day.
-.Every month: clean the photosensitive cell, the ignition electrodes and the flame turbo.
- Every 2 months: clean the fuel filter.
- Every 6 months: clean the fuel tank.
FUEL OIL FILTER
PHOTOSENSITIVE CELL
GB
• every three months or every 300 hours of operation, replace the
filter of the diesel.
• Slide out the photosensitive cell.
• Clean the lens with a soft cloth.
• Refit the cell in its seat with reference to the centring
tooth.
5