Bluetooth - Mobile Phone; Receive A Call - JVC KD-X470BHS Manuel D'instructions

Bluetooth®
Bluetooth — Mobile phone

Receive a call

When there is an incoming call:
• KD-X470BHS/KD-X370BTS/KD-X37MBS:
The buttons will blink in the color you have selected in [RING COLOR].
(Page 23)
KD-X270BT/KD-SX26BT:
The buttons will blink in the blinking pattern you have selected in
[RING ILLUMI]. (Page 23)
• The unit answers the call automatically if [AUTO ANSWER] is set to a selected
time. (Page 23)
During a call:
• KD-X470BHS/KD-X370BTS/KD-X37MBS:
The buttons stop blinking and illuminate in the color you have selected in
[RING COLOR]. (Page 23)
KD-X270BT/KD-SX26BT:
The buttons stop blinking.
• If you turn off the unit or detach the faceplate, Bluetooth is disconnected.
22
ENGLISH
The following operations may differ or be unavailable depending on the
connected phone.
To On the faceplate
First incoming call...
Answer a call
Press
volume knob.
Reject a call
Press and hold
or the volume knob.
End a call
Press and hold
or the volume knob.
While talking on the first incoming call...
Answer another
Press
incoming call and hold
volume knob.
the current call
Reject another
Press and hold
incoming call
or the volume knob.
While having two active calls...
End current call and
Press and hold
activate held call
or the volume knob.
Swap between the
Press
current call and held call
Adjust the phone Turn the volume knob
volume*1 during a call.
[00] to [35] (Default: [15])
Switch between hands-
Press
free and private talk
a call.
modes*3
*1, *2, *3: (see page 23)
On the remote control
Press J / K / H / I.
or the
Press and hold
J / K / H / I.
Press and hold
J / K / H / I.
or the
( Not available )
( Not available )
Press and hold
J / K / H / I.
.
( Not available )
Press VOL +*2 or
VOL – during a call.
during
( Not available )