Fellowes AeraMax PT65 Manuel De L'utilisateur page 10

4. Place the new filters in the main unit.
(HEPA Filter should always be inserted
first and then the Carbon filter).
5. To reset the filter light once a new HEPA
and/or Carbon Filter is installed:
a. B e sure that the front panel is closed.
b. Plug the power cord back into the
wall outlet.
c. Turn unit on by turning the control
knob to the low, medium, or high fan
speed setting.
d. Locate the filter reset hole on control
panel.
e. Use a paperclip or pen to press and
hold the filter reset button for 3
seconds until the illuminated filter light
turns off.
10