General Maintenance - SmartGyro Lobo Mode D'emploi

General maintenance

- Check if the tire pressure is normal.
- Check if the front and rear wheels, the handlebar, the telescope, the base
are well fixed.
- Periodically check the brake system.
- When you go to park it, turn off the power.
- For safe driving and good operating condition, please do regular
maintenance and cleaning.
- Keep your smartgyro out of the rain and puddles.
- Check if the front and rear wheel nuts are tight.
- Periodically check the tire wear.
- Check if the connection points are normal and if the brake cable works
without problems.
- Check that the driving system works well.
- Do not clean with water, so as not to lead to a short circuit caused by
internal electronics.
- Clean dirt spots with a damp cloth and then with a dry cloth.
- Do not put oil on the front and rear brakes, rim or tire.
- Check frequently if the handlebar bar is tight.
- Always use the original charger of your smartgyro, if you use another it
can cause serious problems in the electrical system.
English
Lobo - User Manual
smartgyro.es smartgyro.es
38 1