Permanent Override (Manual Mode) - Honeywell TH115-AF-GA Guide Du Propriétaire

Permanent override of schedule (Manual mode)
To place the thermostat in Manual mode, press Mode/Ret to display
thermostat does not follow the programmed schedule. Press the
temperature.
When you go on vacation (Vacation mode)
In this mode, the thermostat uses the vacation preset temperature (see page 13). There are two ways to
place the thermostat in Vacation mode:
Press the button on the thermostat. When the Vacation mode is activated this way, the
appears on the screen without flashing.
From any remote control device equipped with a dry contact. When the contact closes, the thermo-
stat is placed in Vacation mode and the
are locked. When the contact opens, the thermostat returns to the preceding mode.
NOTE: When the Vacation mode is activated from a remote control device, it can only be deacti-
vated using the device.
icon flashes on the screen. All buttons on the thermostat
17
TH115-AF-GA
on the screen. In this mode, the
, or button to set the
icon