Package Contents - i-tec CHARGER2A4B Mode D'emploi

EN
INTRODUCTION
Network-based USB charger for cell phones, tablets, GPS navigations,
powerbanks, music players, cameras and other types of digital equipment.
2 USB ports DC 5.0V / max. 2.4A are designed for fast and efficient charging
of mobile equipment requiring high charging current. Further, they include
special identification circuits for the iPad/iPhone and Samsung phones and
tablets. The AC 100-240V input enables global use. Safety is ensured by
over-current protection and by constant charging current.
CHARGING INSTRUCTION
• Plug the charger into a power outlet.
• With outputs 2x A-type USB DC 5.0V / max 2.4A you can connect your
digital devices.
• Current 2.4A is the maximum output for the both ports. In case of
recharching from two ports at the same time, this current is being
divided between two ports.
SPECIFICATION
• Input: AC 100-240V / 0.5A
• Output: 2x A-type USB DC 5.0V / max. 2.4A 12.0W
• Off-load: < 0.5W
• Efficiency: 83.6%
• Operation temperature: 0-45 °C
• Compatible charging devices – devices which need 5.0V / max. 2.4A
• Product dimensions: 82 x 42 x 23 mm
• Product weight: 43 g

PACKAGE CONTENTS

• i-tec USB Power Charger 2 Port
• Quick Start
CAUTIONS
• The charger should be kept out of children's touch, children should use
it only under adults' supervision.
• Don´t adjust the output switch of polarity manually, when the adapter
is working.
• Don´t disassemble, reassemble the charger or for other use.
• For indoor use only, keep away from humidity and heat surrounding.
• Operating temperature: 0-45 °C. Make sure that voltage of power
adapter (DC 5.0V) is correct for your device.
6
i-tec USB Power Charger