Additional Safety Instructions - Kärcher GSH 18-20 Battery Mode D'emploi

handle does not switch on and off correctly. ● Risk of in-
jury because the blades continue rotating after the mo-
tor has been switched off. ● Risk of serious injuries and
equipment damage. Make sure that the cutting tool is
properly installed and securely fastened before you start
up the device. ● Do not use the device if there is a dan-
ger of lightning. ● Never start up a device that is incom-
plete or is equipped with unauthorized modifications.
● Never use the device with defective protective devices
or with no installed safety devices. ● Switch off the de-
vice in the case of a malfunction or accident, and re-
move the battery pack. You may only start up the device
again if it has been checked by an authorized customer
service centre.
CAUTION
● Familiarise yourself with the con-
trols and the correct use of the device. ● Risk of injury
when loose fitting clothing, hair or jewellery is caught by
moving parts of the device. Keep clothing and jewellery
away from moving parts of the device. Tie long hair
back. ● Increased risk of accident in bad weather condi-
tions. Only use the device when safe working is guaran-
teed. ● The noise from the device can impair your ability
to hear, so pay attention to possible hazards in your vi-
cinity and in the work area. ● Risk of injury. Always wear
safety goggles, sturdy shoes and suitable clothing when
using the device.
ATTENTION
● The device operator is responsible
for accidents with other people and their property.
Shrub shears safety warnings
● Keep all parts of the body away from the cutter
blade. Do not remove cut material or hold mate-
rial to be cut when blades are moving. Make sure
the switch is off when clearing jammed material.
A moment of inattention while operating the shrub
shear may result in serious personal injury.
● Carry the shrub shears by the handle with the
cutter blade stopped. When transporting or stor-
ing the shrub shear always fit the cutting device
cover. Proper handling of the shrub shear will re-
duce possible personal injury from the cutter blades.
● Hold the power tool by insulated gripping sur-
faces only, because the cutter blade may contact
hidden wiring or its own cord. Cutter blades con-
tacting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator
an electric shock.
● Keep cable away from cutting area. During oper-
ation the cable may be hidden in shrubs and can be
accidentally cut by the blade.

Additional safety instructions

WARNING
● The device is not intended for
use by children, persons with restricted physical, senso-
ry or mental abilities or persons unfamiliar with these in-
structions. The age of the operator may be limited by
local restrictions. ● Keep your hands and feet away from
the cutting area, especially when switching on the mo-
tor. ● Replace any worn or damaged parts before oper-
ating the device. ● Avoid switching the device on
unintentionally. Make sure that the on/off switch is in the
off position before connecting the battery pack, lifting or
carrying the device. ● Use the device only in daylight or
under good artificial lighting. ● Do not run but rather
walk when working with the device. Maintain a solid and
safe footing and keep your balance, especially when
working on gradients. ● Check that the moving parts
14
function correctly and are not blocked, and that no parts
are broken or damaged. Have a damaged device re-
paired before using it. ● Do not forcefully operate the
device. ● Switch the motor off, remove the battery pack
and make sure that all moving parts have stopped mov-
ing:
● Before making any adjustments.
● Before leaving the device unattended.
● Before checking, cleaning or servicing the device.
● Before removing a blockage.
● Before changing accessories.
● After hitting a foreign object. First check the device
for damage and repair any damage before restarting
the device.
● When the device starts to vibrate unusually. First
check the device for damage and repair any dam-
age before restarting the device.
● Switch off the motor if you stop the cutting process or
if you move from one operating location to another.
CAUTION
clothing, hair or jewellery is caught by moving parts of
the device. Keep clothing and jewellery away from mov-
ing parts of the device. Tie long hair back. ● Have repair
work carried out by the authorised customer service on-
ly. ● Wear long, heavy trousers, sturdy shoes and well-
fitting gloves when working with the device. Do not work
barefoot. Do not wear any jewellery, sandals or short
trousers.
Safe servicing and care
WARNING
battery pack and make sure that all moving parts have
stopped moving:
● Before cleaning or servicing the device.
● Before changing accessories.
● Each time after using the device, remove dirt from the
cutting tools using a hard brush and apply a suitable oil
for rust protection before fitting the blade guard. The
manufacturer recommends using a spray for rust pro-
tection and oiling. Ask your Customer Service depart-
ment to recommend a suitable spray. You can oil the
cutting tools as described, each time before using the
device. ● Keep the cutting tools sharp and clean. Sharp
cutting tools are easier to control and do not block so
easily. ● Make sure that the ventilation openings are
free of deposits. ● Risk of injury from sharp cutting tools.
Exercise special care when removing and fitting the
blade guard, cleaning and oiling the device.
CAUTION
tools. Wear non-slip, sturdy protective gloves when
handling the cutting tool. ● Risk of injury from exposed
blades. Fit the blade guard when not using the device,
also during short work breaks. ● Keep the handles dry,
clean, and free from oil and lubricants. ● Only use ac-
cessories and spare parts which are approved by the
manufacturer. Only original accessories and original
spare parts ensure that the appliance will run fault-free
and safely.
ATTENTION
cloth each time after use. ● Do not use solvents to clean
the plastic parts, as they attack the materials used on
the device. Remove impurities such as dust, oil and lu-
bricants using a clean cloth.
Note
● Service and maintenance work may only be
performed by suitably qualified and specially trained
English
● Risk of injury when loose fitting
● Switch the motor off, remove the
● Risk of injury from sharp cutting
● Clean the product with a soft, dry