Control Panel Description - Chauvet DJ HURRICANE HAZE 4D Mode D'emploi

EN
Mounting
Before mounting this product, read the
Mounting Diagram
Safety Cable
(such as CH-05 from
Chauvet)
Adjustable Scoop
This product may NOT be tilted. This product should be level when on a surface or when
mounted.
While operating the Hurricane Haze 4D, make sure there is adequate haze fluid in the machine to
prevent pump and heater damage. When the haze fluid level becomes low, simply add more haze
fluid to continue using the Hurricane Haze 4D.

Control Panel Description

BUTTON
<MENU>
<UP>
<DOWN>
<ENTER>
Manual Control Knobs
KNOB
Blower Speed
Haze Volume
• As long as there is fluid in the line, the Hurricane Haze 4D will continue to output a small
amount, even with the Haze Volume knob turned all the way down.
• After use, allow the Hurricane Haze 4D to run for several minutes with the Haze Volume knob
turned all the way down, until the line is clear of fluid.
3
QUICK REFERENCE GUIDE
Safety Notes.
Fluid Level
Indicator
FUNCTION
Exits from the current menu or function
Navigates upwards through the menu list and increases the numeric value when in a
function
Navigates downwards through the menu list and decreases the numeric value when in a
function
Enables the currently displayed menu or sets the currently selected value into the selected
function
FUNCTION
Left knob, turn clockwise to increase blower speed from 1–100
Right knob, turn clockwise to increase haze volume from 0–100
Mounting Clamp
(such as CLP-15 or CLP-15N
from Chauvet)
Mounting Bracket
Bracket
Adjustment Knob
Hurricane Haze 4D QRG Rev. 3