Via Usb; Using A Memory Card - Parrot DF7700 Mode D'emploi

2. Via USB

1. Connect the Parrot DF7700 to
your PC with the USB cable.
> The computer detects
a new device.
2. Copy your GIF or JPEG (except
CMYK) pictures to the Parrot
DF7700.
3. Disconnect the cable from the Parrot DF7700.
> The Parrot DF7700 automatically saves the pictures.
4. Repeat the procedure if you wish to transfer new pictures.
NOTE: THE PARROT DF7700 FEATURES 64 MO OF STORAGE SPACE: TO
SAVE SPACE, REMEMBER TO RESIzE YOUR PICTURES BEFORE COPYING
THEM TO THE INTERNAL MEMORY.
14

3. Using a memory card

1.Insert the memory card into the
appropriate slot.
> The JPEG and GIF pictures stored on
the memory card are displayed.
> You can now navigate through the
memory card content using the Select
buttons.
2. Select the «Copy» icon.
Select one of the following options as required:
- Copy current picture
- Copy selected pictures (in this case, you must select
the pictures that you wish to copy by using the Select
and Enter buttons, select the Exit icon and then
confirm your choice)
- Copy all pictures
3. Confirm your choice.
> The selected photos are resized and copied to the internal
memory.
NOTE: IF YOU WISH TO SWITCH BACK TO THE INTERNAL MEMORY,
SELECT THE USE INTERNAL MEMORY ICON.