Cleaning The Soleplate; Technical Specifications - HAEGER Tailor 1.2 Mode D'emploi

Cleaning
To clean the exterior of your iron, wipe over with a damp soft cloth and wipe dry.
Caution: Do not use harsh abrasives, chemical cleaners or solvents to clean the exterior of your iron as these will damage th e
surface.

Cleaning the soleplate

The non-stick coating reduces sticking of fabrics and scratches to the soleplate. Do not iron over sharp objects such as buttons,
studs and zippers, as these will scratch the surface.
Wipe the soleplate with a damp soft cloth after each use. If polyester has burnt to the soleplate, iron a damp cotton cloth w hile hot.
Caution: Do not use scouring pads, abrasives or harsh cleaners to clean your soleplate, as these will scratch and damage the
surface.

Technical Specifications

Model: DI-120.001B
Protection Class: I
Conformity CE
This product has been tested and produced according to all relevant current CE guidelines, such as:
- electromagnetic compatibility Directive 2014/30/EU,
- Low voltage Directive (LVD) Directive 2014/35/EU,
- RoHS with its amendments Directive 2011/65/EU
and has been constructed in accordance with the latest safety regulations.
The CE mark attests this product with all relevant directives.
Instructions for use
Main voltage: 220-240V~ 50/60Hz
Power: 1200W
English
5