Assemble As A Mulcher - GreenWorks 24072 Guide D'utilisation

ASSEMBLY

ASSEMBLE AS A MULCHER

(See Fig. 3)
1. Slide the front and rear mulcher tubes together until the lock button engages. (See fig 3)
2. Pull the lock button forward to disengage the gate. Hold the gate open. (See fig 3.1)
3. Insert the "wedged" end clip of the mulcher tube into the rear clip. (See fig 3.2). Push the
"hooked" end clip of the mulcher tube into the front clip. (See fig 3.3). Press the lock button back
to engage the mulcher tube. (See fig 3.4)
4. To remove mulcher tubes, follow the steps (3) (2) (1).
5. Insert the bag adaptor into the blower outlet. Lock the bag adaptor with the lock button. To re-
move the bag, simply press lock button and remove bag. (see Fig.5).
NOTE: It may be necessary to remove the blower tube or mulcher tubes to clear a blocked tube or impeller.
W A R N I N G
To prevent serious personal injury, make sure the switch is in the OFF position, it is unplugged, and
the impellers have stopped before attaching or removing tubes.
Fig.3
Fig.3.1 Fig.3.2 Fig.3.3
②
③
①
Lock button
Fig.3.4 Fig.3.5
⑤
④
13