S&P ARTIC TOWER M Notice D'installation Et D'utilisation page 12

a) Speed adjustment
By adjusting speed button, you can select up to three different operating speeds. The
front indicator lights, indicating the selected speed.
b) Oscillation mode
Fan ARTIC TOWER E has a mechanism that allows the oscillation of the column.
Pressing the button enables or disables the oscillation mode. The front indicator is lit
when the oscillation mode is enabled.
c) Timer ON/OFF
Using the control buttons on the timer, it is possible to program fan on or off
automatically.

Timer ON: The fan is always in OFF mode, the user can program when to
start ventilating the room. After this time, the fan always starts at slow speed
without oscillation mode.
Example ------------------------------------------------------------------------------
6 hours after programming, the fan always starts automatically on slow speed.
-----------------------------------------------------------------------------------------

Timer OFF: The fan is always in ON mode, the user can program the run on
time of the fan. After this time the fan stops automatically.
Example ------------------------------------------------------------------------------
Slow speed
Medium speed
Fast speed
Timer ON
1H 2H 4H
Timer OFF
Timer ON
1H 2H 4H
Timer OFF
12
6H 8H
6H 8H