Philips Satinelle Ice Premium Mode D'emploi page 15

Problem
Skin irritation
occurs.
The skin cooler
is not cold
enough.
Possible cause
You did not
attach the
epilating
head correctly.
You used the
epilator for the
first time or
after a long
period of disuse.
You have
applied too
much pressure
to the appliance
You did not
freeze the skin
cooler long
enough.
You did not put
the skin
cooler in the
freezer or
freezing
compartment.
The skin cooler
did not touch
the skin.
Solution
Place the epilating head on the
appliance and press it onto the
appliance until it snaps home
('click').
Some skin irritation may occur the
first few times you use the
appliance. This is absolutely normal
and usually disappears quickly. For
tips to reduce skin irritation, see
the first section of chapter 'Using
the appliance'. Also make sure you
keep the epilating head clean.
Do not use any pressure when
moving the appliance over skin
Put the skin cooler without the
insulating sleeve in the freezer or
freezing compartment (***) for at
least 4 hours. When the colour of
the fluid has changed from white
to completely blue, the skin cooler
is ready for use.
Put the skin cooler without the
insulating sleeve in the freezer or
freezing compartment (***) for at
least 4 hours. Do not store the
skin cooler in the refrigerator.
Make sure the skin cooler is
always in proper contact with your
skin during epilation.
EnglisH
15