Cleaning And Maintenance - Espressione CE4550 Mode D'emploi

Cafetière espresso
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5

CLEANING AND MAINTENANCE

Unplug the coffee maker from the mains.
Clean the tank and filter holder regularly. We recommend allowing 1-2
cups of water to run through the filter holder (with no coffee in the filter),
to clean the filter holder.
Do not use alcohol, solvents or abrasive products to clean the coffee
maker or tray, just a soft damp cloth.
Cleaning the filter holder
Clean the filter holder (4) thoroughly from time to time. To do so, proceed
as indicated below (fig. 8):
1.
Press the filter holder flap (6) downwards and remove the lower plastic
base (7).
2.
Clean both parts of the filter holder with water. Move the filter selector
switch (5) to different positions to ensure all the coffee remains trapped
in the filter holder are eliminated.
3.
Replace the plastic base in the filter holder, fitting the projecting part
into the opening of the filter holder handle.
Cleaning the steamer
1.
If you use the steam nozzle to heat milk, clean it as soon as possible
for easy cleaning. Wait for the steam nozzle to cool down and wipe it
with a damp cloth.
2.
Every now and again, for more thorough cleaning of the steamer,
proceed as follows: wait until the steamer cools down and unscrew its
cylindrical part anticlockwise. Wipe the steamer spindle with a damp
cloth and soap the cylindrical part. Make sure that the small hole at the
top of the steamer is clean before refitting the part. Fit the steamer on
its spindle, screwing it clockwise.
The appliance has an automatic de-pressurizing system that channels some
of the water from the dregs into the tray. It is advisable to remove the water
from the cup-holder tray regularly.
Limescale Removal
We recommend de-scaling the appliance once a year using a special
product for coffee machines so as to maintain the coffee maker in perfect
condition. We recommend the Espressione de-scaling agent.
1.
Follow the instructions that come with the de-scaling product.
2.
To flush out the circuits, fill the tank again with water only, switch on the
coffee maker, fit the filter holder without coffee, and carry out all the
steps described in the 'Operation' section twice. During this process,
press the switch (3) and let steam out for 1 minute.
8

Publicité

Table des Matières
loading

Table des Matières