Maytag MDG28PD Instructions D'installation page 24

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ELECTRONIC CONTROL SETUP INSTRUCTIONS
Code
Explanation
1. 00
MONEY COUNTER OPTION
This option is either NOT SELECTED "OFF"
or SELECTED "ON."
1. 00
Not Selected "OFF."
1. 0C
Selected "ON."
• Press the STOP/PAUSE keypad 3 consecutive
times to select "ON" and 3 consecutive times
to deselect (Not Selected "OFF"). Counter resets
by going from "OFF" to "ON."
1. C0
Selected "ON" and not able to be deselected.
• To select "ON" and not able to be deselected,
first select "ON," then within 2 seconds, press
the STOP/PAUSE keypad twice, the WHITES
AND COLORS keypad once, and exit setup
mode.
• Press the DELICATES keypad once to advance
to next code.
2. 00
SPECIAL PRICING OPTIONS
This option is either NOT SELECTED "OFF"
or SELECTED "ON."
2. 00
Not Selected "OFF."
2. SP
Selected "ON."
• Press the STOP/PAUSE keypad once to change
this selection.
If SPECIAL PRICING OPTION is selected, there is access
to codes "3.XX" through "9.XX."
• Press the DELICATES keypad once to advance
to next code.
If money counter (1.0C or 1.C0) is selected, the following
is true:
3 00
Currency amount
in HUNDREDS
4 00
Currency amount
in ONES
5 00
Currency amount
in HUNDREDTHS
24
OPTIONS 3.XX – 9.XX TO USE IF SPECIAL PRICING
IS SELECTED
Code
3. 06
3. 06
3. 00
4. 05
4. 05
4. 45
5. 00
5. 00
6. 00
3 01 = 100.00
6. 00
4 68 = 68.00
5 75 = 00.75
TOTAL = 168.75
Explanation
SPECIAL CYCLE PRICE
Represents the number of coins (coin 1)
to start the dryer; may adjust from 0–39.
(See b.xx setup for VALUE OF COIN 1.)
• Advance from 0–39 by pressing the
WHITES AND COLORS keypad. Factory default
of 6 x coin 1.
PN MODELS ONLY: Factory default of 0 coins.
• Press the DELICATES keypad once to advance
to next code.
SPECIAL DRY TIME
PD MODELS: Represents the number of minutes
per coin (coin 1).
• Factory default of 5 minutes per coin.
Example: 6 coins x 5 minutes = 30 minutes.
• By pressing the WHITES AND COLORS keypad,
the value can be adjusted from 1–99 minutes.
PN MODELS: Represents the cycle length for free
cycles. Example: "4 45" = 45 minutes.
• Press the DELICATES keypad once to advance
to next code.
TIME-OF-DAY CLOCK, MINUTES
This is the TIME-OF-DAY CLOCK, minute setting;
select 0–59 minutes by pressing the WHITES AND
COLORS keypad.
• Press the DELICATES keypad once to advance
to next code.
TIME-OF-DAY CLOCK, HOURS
NOTE: Uses military time or 24-hr. clock.
This is the TIME-OF-DAY CLOCK, hour setting;
select 0–23 hours by pressing the WHITES AND
COLORS keypad.
• Press the DELICATES keypad once to advance
to next code.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Mdg28pnMde28pdMde28pn

Table des Matières