Important Recommendations - BWT SR LIGHT SRF-1 Notice D'installation

IMPORTANT RECOMMENDATIONS

The electrical panel must be installed by professionals in accordance with the standards in effect.
The power supply of the electrical panel must be protected by a 30 mA differential circuit breaker at the
top of the line.
Make sure that the power supply has been disconnected upstream from the electrical panel prior to any
action requiring the removal of the front plate.
The electrical panel must be equipped with a circuit breaker suitably rated for the electrical power of
the motor to be supplied.
Installation of a circuit breaker that is too powerful could cause damage to the electrical motor.
If you replace the fuse, make sure to use a fuse with an identical rating.
Use of the «filter» switch
• "M" position : Continuous filtration mode.
• "A" position : Timer programmed filtration mode.
• "0" position : Permanent stop position.
CONSTRUCTION & RÉNOVATION 2021/01 - Indice de révision : G - Code : 32602
13/40