Suspending The Dehumidifier; Hanging The Dehumidifier; Ducting - Anden SURNA S710V1 Directives D'installation Et Mode D'emploi

SUSPENDING THE DEHUMIDIFIER

HANGING THE DEHUMIDIFIER

Use 3/8" or 1/2" threaded rod to suspend
the unit from appropriate ceiling structure
(see FIGURE 4)� The unit weight is 360 lbs�
Install vibration isolators if located in an
area where noise could be a concern� Level
unit right to left and front to back so that
unit drains properly� IMPORTANT: Install
lock nuts to secure the dehumidifier to
the threaded rod as shown in FIGURE 5.

DUCTING

Use duct kit part number 5859 for installing
ductwork to the dehumidifier� Reference the
instructions provided with duct kit 5859 for
installation details�
6 English
FIGURE 4 – SUSPENSION
FIGURE 5 – SECURE BRACKET TO DEHUMIDIFIER
4X VIBRATION ISOLATORS
(OPTIONAL)
4X DOUBLE NUT BOTTOM WITH FLAT WASHER,
SINGLE NUT ON TOP