AGA marvel 41013943 Instructions D'installation, D'utilisation Et D'entretien page 5

6) Remove the hex head screws from around the perim-
eter of the rear access cover with the
remove the access cover from the ice machine. (See
Figure 6).
7) Loosen the hose clamp at the bottom of the drain tee
and remove the discharge tubing from the drain tee. (See
Figure 6a).
8) Loosen the hose clamp from the top of the drain tee and
remove the drain tee from the connector. (See Figure 6a).
Loosen hose clamp
and remove drain tee.
Drain tee
Loosen hose clamp and
remove discharge tubing
Discharge tubing
DRAIN PUMP INSTALLATION
⁄ " nut driver and
5
16
Figure 6a
5
Figure 6
Access
cover
#10 hex
head screw