EFF EFF 720-10 Mode D'emploi page 12

The escape door control unit 720-10 is provided
with the following inputs for external equipment,
i.e.
Locking elements
Holding magnet 827* (max. 2 units, for
parallel operation only)
or holding magnet 828* (max. 2 units, for
parallel operation only)
or holding magnet 829* (1 unit)
or electric panic door release 3150*
(max. 2 units, for parallel operation only)
or escape door release 331 RR AK RR
(max. 2 units, for parallel operation only).
Control and monitoring element
Door terminal 1337-10 (11)
Additional control and monitoring elements
- Central display panel 725
- Door status signal contact
- Fire alarm system (line activation)
- External display units for functional status
indication:
(door unlocking, door locking, emergency
door unlocking and sabotage).
- External acoustic warning (hooter or siren)
- Safety relay socket 7422-24 for versions
linked to a central emergency unlocking unit.
Table of component power requirements permitting calculation of residual power
available for additional external equipment such as a siren / flashing lamp, etc.
Unit combinations with 2 holding
basic equipment magnets
827 / 500 mA 828 / 325 mA
Control unit 720-10 190 mA
Control unit 720-10 185 mA
Door terminal 1337-10
Control unit 720-10 175 mA
Door terminal 1337-10 (11)
Central panel 725
12
Status signal contacts/door contacts
!
If holding magnets or panic door releases
3150 are used, it is necessary to install an
external door contact in the door element.
By means of this contact, the escape
door control system is informed that the
corresponding escape door is closed, in
order to ensure effective locking.
If the escape door release 331 RR AK RR
is used as the door locking element, no
additional door contact is required, since
the monitoring contact for the door status
(door open/closed) is built into the escape
door release.
This set of switching contacts activates a
signal as soon as the lock keep has
engaged the door release.
A further set of switching contacts, built into the
escape door release locking elements
(excluding holding magnets 827), ensures that
the door locking function has effectively been
carried out.
This signal is activated by a Hall-effect element
in the case of holding magnets or by an armature
contact in the panic release and in the escape
door release and is directed to the escape door
control unit for evaluation.
1 holding 2 holding
magnet magnets
828 / 650 mA
365 mA 40 mA
360 mA 35 mA
350 mA 25 mA
1 holding 1 panic 1 escape
magnet release door release
829 / 650 mA 3150 / 300 mA 331 / 160 mA
40 mA 390 mA 530 mA
35 mA 385 mA 525 mA
25 mA 375 mA 515 mA