Table des Matières
Publicité
SELECTING UTILITY
STITCH PATTERN
Utility stitches are indicated in the pattern chart
located inside of the top cover. Select utility stitch
pattern as follows:
1. On the Home screen, touch the Utility button.
First 18 patterns will be indicated on the LCD.
(Stitch selection mode)
2. Touch the scroll down button, next 18 patterns
will appear.
By touching the scroll up or down button, you
can scroll up or down in increments of 18
patterns.
3. Touch the desired pattern directly.
4. When pattern is selected, LCD will indicate the
information of selected pattern.
(Stitch information mode)
STITCH INFORMATION
a. Stitch Pattern
The shape of stitch pattern will change
according to the setting of stitch length, width,
mirror/reverse and elongation.
b. Pattern Number
c. Thread Tension Button (See page 40)
d. Recommended Presser Foot
Indicated presser foot is one of suggested
foot for normal sewing. You can use other
presser foot according to the purpose of sewing
described in this booklet.
e. Tack Button (See page 46)
f. Mirror/reverse Button
When this button appears, you can select mirror
stitch, reverse stitch or mirror/reverse stitch.
Touching this button, stitch will fl ip from left
to right or from front to back. The icon on the
button indicates the selected stitch as follows:
i. Regular stitch (normal stitch)
ii. Mirror stitch (reverse left and right)
iii. Reverse stitch (reverse front and back)
iv. Mirror and Reverse stitch
36
a
b
d
e
i
ii
f
c
f
iii
iv
Publicité
Table des Matières
